>...Perhaps it would be better, if harder, >to angle the pieces, so that they make diagonals... >...Are "one-bys" thick enough? >Susan I feel confident about the one-bys being sufficient, Susan. Will consider the diagonal direction idea. >..Really check the plate bolts... >... Also carefully check the lower spacer blocks... >You coud dry fit the slats with screws >and C clamps to test the theory... >Regards Roger Thanks for the late night ramblings, Roger. Definitely will dry fit first. >I think that a dolly would appear less'rigged' that the addition of wooden >rails. >The dollies are only about $150. >Jon Page The wooden rails might catch some initial attention, but if they work, the piano will just be a unique piece of modified piano construction that will be the least of anyone's concern because the piano will be in tune. Cost: maybe $30 or less. Thanks once again, for the additional input, folks. Keith McGavern, RPT Oklahoma Baptist University Saint Gregory's University Shawnee, Oklahoma, USA
This PTG archive page provided courtesy of Moy Piano Service, LLC