Del: I was meaning the lowest plain wire section - F3 - A3 or so. That area of the 243HP is improved over the 243, but still sounds like too low a tension. Do you have tension figures off hand? dave *********** REPLY SEPARATOR *********** On 11/12/01 at 7:58 AM Delwin D Fandrich wrote: >----- Original Message ----- >From: "David M. Porritt" <dm.porritt@verizon.net> >To: <caut@ptg.org> >Sent: November 11, 2001 6:26 AM >Subject: Re: Replacing plain wire > > >> Steve: >> >> I think I'll get some of that wire and see if I can improve the >> lowest area on a 243HP. I'm up to my nose in these things, I might >> as well use one for an experiment. >> >> dave >> >> *********** REPLY SEPARATOR *********** > >What do you mean by "the lowest area?" > >-- ddf a _____________________________ David M. Porritt dporritt@mail.smu.edu Meadows School of the Arts Southern Methodist University Dallas, TX 75275 _____________________________
This PTG archive page provided courtesy of Moy Piano Service, LLC