Sharp key height

[Isaac OLEG SIMANOT]

Hello,

In Europe, the common dimension is possibly 12 mm (0.48 ').
Beside, depending of the sharps you can put them high enough so the wood of
the key is not yet visible, but the most important thing is not to have them
bury when you have the proper after touch.
Burying sharps make a very difficult to play keyboard.

Regards

Isaac OLEG

> -----Message d'origine-----
> De : owner-caut@ptg.org [mailto:owner-caut@ptg.org]De la part de
> A440A@aol.com
> Envoyé : jeudi 25 octobre 2001 22:59
> À : caut@ptg.org
> Objet : Re: Sharp key height
>
>
> John writes:
>
> <<What height do folks  prefer on sharps? Although I've seen 1/2" is
> common, this feels just a bit too high for my liking.>>
>
>   Greetings,
>     I think 1/2" is the max.  but I don't set the heights on the sharps
> without first determining the blow distance and let-off........
> Ed
>
>