Ed, Renner--but they are not blues. He could not compare the Baldwin/Renner hammers to the Renner Blue. Thanks for your reply. Elwood ----- Original Message ----- From: "Ed Sutton" <ed440@mindspring.com> To: "College and University Technicians" <caut@ptg.org> Sent: Wednesday, December 18, 2002 7:50 AM Subject: Re: Hammers for SD-10 > Elwood- > Did you ask Baldwin who makes their SD-10 hammers? > Ed Sutton > ----- Original Message ----- > From: "Elwood Doss, Jr." <edoss@utm.edu> > To: <caut@ptg.org> > Sent: Wednesday, December 18, 2002 8:33 AM > Subject: Hammers for SD-10 > > > > Hey folks, > > I need to replace hammers on a Baldwin SD-10. I am considering either > Renner Blue hammers or Baldwin replacement hammers. The Baldwin Tech said > that the Baldwin hammers were wider than the Renner hammers; were not Renner > blues, but similar. He mentioned the weight of the hammers but was not sure > what the weight was. > > > > Any thoughts? > > > > Also would you also replace the hammer shanks? Can I get away with not > replacing them? Of course, I will regulate the action. > > > > Thanks for your help. > > > > Merry Christmas! > > Elwood Doss, Jr. > > University of Tennessee at Martin > > > > _______________________________________________ > > caut list info: https://www.moypiano.com/resources/#archives > > > > _______________________________________________ > caut list info: https://www.moypiano.com/resources/#archives >
This PTG archive page provided courtesy of Moy Piano Service, LLC