Hey, In Louisiana it's so humid, we have readily available catalyst. : ) I just put a drop, it dries pretty quick. Water thin w/needle nose applicator. Lance Lafargue, RPT Mandeville, LA New Orleans Chapter, PTG lancelafargue@bellsouth.net 985.72P.IANO -----Original Message----- From: owner-caut@ptg.org [mailto:owner-caut@ptg.org]On Behalf Of Michael Jorgensen Sent: Monday, July 22, 2002 10:55 AM To: caut@ptg.org Subject: Re: ROGER JOLLYS' IDEA WORKED Thanks Lance, I'll try it. Do you keep adding drops as long as the glue wicks down in or do you use just one drop for each pin? I assume also that you let it dry naturally without catalyst, which could take some time to solidify and make an improvement? -Mike Lance Lafargue wrote: > It worked for me, too, Mike. You may try water thin CA on the pins later, > w/out getting it on the string/pin termination. Apply w/needle-nose > applicator from the back side, away from the string. > Lance Lafargue, RPT > Mandeville, LA > New Orleans Chapter, PTG > lancelafargue@bellsouth.net > 985.72P.IANO >
This PTG archive page provided courtesy of Moy Piano Service, LLC