This is a multipart message in MIME format ---------------------- multipart/alternative attachment >On a Yamaha upright recently I tapped the pins, and wound up= driving them down below the level of the strings. I >had to= release tension, and put the pin back in, but it didn't bottom= out. It almost makes me wonder if this might >be the case in= other pianos. >So what is the real reason for tapping? More wood, or less pin? Wim Willem Blees, RPT Piano tuner/technician School of Music University of Alabama Wim, I'd avoid a 5 lb hammer when tapping bridge pins in...;-] David I. ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/caut.php/attachments/8a/19/cf/91/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC