Rick Florence wrote: > Some might consider not knowing what a pitman is, or not knowing the > Steinway spec. for hammer shank distance as a sign of incompetence. > > Incompetence is a relative term. > > Rick True.... one might consider letting a person fuel jetliners who didnt know the difference between JP-5 and Diesel incompetant. Or .... one might not bother defining incompetance in a personal sense, and just consider that a person who knows not these things is simply not qualified for the job. relatively speaking :) Ric > > on 3/10/04 10:37 AM, Wimblees@aol.com at Wimblees@aol.com wrote: > > > > I don't know if the washer was attached by a very incompetent > piano tuner, or by some ingenious customer. Lets hope it was the > latter, but knowing some of the technicians in this part of the > country, it was probably the former. > > Wim > Willem Blees, RPT > Piano tuner/technician > School of Music > University of Alabama > > > > _____________ > Rick Florence > Piano Technician > Arizona State University, School of Music
This PTG archive page provided courtesy of Moy Piano Service, LLC