David, I spent a bit of time in the pianotech achives and couldn't find the list from Newton. Could you give me some more info? I'd love to have his list of specs. Thanks Jim Busby -----Original Message----- From: caut-bounces@ptg.org [mailto:caut-bounces@ptg.org] On Behalf Of David Love Sent: Friday, March 12, 2004 6:47 PM To: rwest1@unl.edu, College and University Technicians Subject: RE: hammers Newton Hunt put a list of bore specs for various pianos on the pianotech list a year or two ago. Steinway will send you their specs if you ask them. David Love davidlovepianos@earthlink.net > [Original Message] > From: Richard West <rwest1@unl.edu> > To: College & University Technicians <caut@ptg.org> > Date: 3/12/2004 9:17:19 AM > Subject: hammers > > Hello, All, > > Does anyone know of a published list of hammer angles for a variety of > popularly rebuild pianos, i.e. Steinway, M&H, Baldwin, etc.? I've > replaced several set of hammers over the years and have always wondered > what the factory specs were for bass hammer angle, and the fan of the > tenor to treble hammers. I've just always bored hammers to match what I > find on the particular piano I might be working on. > > Richard West, University of Nebraska > > _______________________________________________ > caut list info: https://www.moypiano.com/resources/#archives _______________________________________________ caut list info: https://www.moypiano.com/resources/#archives
This PTG archive page provided courtesy of Moy Piano Service, LLC