Also might try tightening it up good & applying a few drops of thin CA. (Not necessarily in that order) Cheaper than Loktite & you've probably got some in your kit. Otto ----- Original Message ----- From: "Brad Smith" <brad@smithpiano.com> To: <caut@ptg.org> Sent: Wednesday, May 05, 2004 3:30 PM Subject: Loose tuning hammer tip > Hello List, > > Any suggestions on how to keep a tuning tip from constantly working > loose? I just started using an extension hammer after 23 years with a > one-piece > Yamaha hammer. The extension is GREAT, and I've wrapped it with cork > tape from a bicycle shop, to pad the handle. Only problem is the tip > keeps > working itself loose throughout the day. I guess I want to be able to > remove it if the need arises, or I would have epoxied it together..... > > Thanks in advance for any help! > > > Best regards, > > Brad Smith > Smith Piano Services > 800-964-TUNE (8863) Toll Free > 603-625-4696 in New Hampshire > 483 Donald Street > Bedford, NH 03110 > brad@smithpiano.com > www.smithpiano.com > > _______________________________________________ > caut list info: https://www.moypiano.com/resources/#archives
This PTG archive page provided courtesy of Moy Piano Service, LLC