[CAUT] Rhodes

[Victor Belanger]

Hi Alan,

I had to order some legs for the Fender Rhodes here and I got great 
service from Julie drake @:
http://www.majorkey.com/

Good luck.

Regards.

Victor Belanger

At 1:22 PM -0700 9/28/04, Alan McCoy wrote:
>Date: Tue, 28 Sep 2004 13:22:18 -0700
>From: Alan McCoy <amccoy@mail.ewu.edu>
>To: CAUTlist <caut@ptg.org>
>Subject: [CAUT] Rhodes
>
>Hi folks,
>
>I am reconditioning our Fender Rhodes.
>
>Had to dust off the old bellbottoms and platform shoes....
>
>I have looked over the manual that I haven't looked at in 20 years and
>nowhere does it mention anything about how loose/tight the hammer pinning
>should be. These hammers are consistently wiggly, loosy goosy. I'm thinking
>they should be a tad tighter. Anyone have  thoughts and experience with
>these polyester-friendly beasts?
>
>Also the beast is missing all four legs. Anyone out there have a set of four
>legs that need to be reunited with our friendly Rhodes beast? Will pay for
>legs.
>
>Thanks.
>
>Alan "Lurkster" McCoy
>
>
>
>-- Alan McCoy, RPT
>
>Eastern Washington University
>119 Music Bldg
>Cheney, WA 99004
>
>(509) 359-4627
>amccoy@mail.ewu.edu