[CAUT] Today's Puzzler.

[Thomas Seay]

Damper head hitting the plate strut?
If so, move the damper head by adjusting the straight bend in the 
wire or sand off the edge of the damper head that's striking the 
strut.

Tom

>Hello all.
>
>I asked this question last night on Pianotech, and I admit I 
>neglected to send it here..until now.
>
>Here is what I sent:
>
>
>Hello all.
>
>Actually, I know the answer to the puzzler..but I'm not sure of the 
>remedy..so here goes.
>
>-1915 M&H A (1st BIG clue)
>-B2 is the first note in the tenor..clicking sound..sounds like a 
>loose hammer head(not)..and it's not a loose upstop rail.
>-2nd clue: it is not in the Hammers, Shanks, or Knuckles that I just 
>replaced..nor is it in the regulation that was performed after 
>replacing said parts.
>
>That should narrow it down for you.
>
>Be specific with your answer..and your remedy. My back will thank you for it.
>
>Puzzlingly yours,
>
>-Phil Bondi(Fl)
>
>
>_______________________________________________
>caut list info: https://www.moypiano.com/resources/#archives