[CAUT] Pulley keys.

[Hans E Sander]

---------------------- multipart/alternative attachment
Hi Jim,
The holes were drilled consistent at the factory (believe me) but somebody =
later (maybe even in the factory) removed, pulled the keys the wrong way. =
I have seen this many times.
Hans Sander=20

>>> jim_busby@byu.edu 03/25/05 3:04 PM >>>

Hi Joe, No, the holes aren't consistent. In fact, if you insert a "CF" =
tool you see that sometimes the hole is oblong from top to bottom and =
sometimes it is oblong side to side. I'm not sure what's happening.  I =
know how to fix it, I'm just wondering why it is that way, and frankly, =
our church buys thousands of these and I'm in a position to influence =
them.  Regards,Jim -----Original Message-----
From: caut-bounces@ptg.org [mailto:caut-bounces@ptg.org] On Behalf Of Joe =
And Penny Goss
Sent: Friday, March 25, 2005 12:47 PM
To: College and University Technicians
Subject: Re: [CAUT] Pulley keys. Hi,
Any chance they forgot to chance drill sizes at the factory?
If all are the same oversize this seems like a posibility.
Joe Goss RPT
Mother Goose Tools
imatunr@srvinet.com
www.mothergoosetools.com
----- Original Message -----=20
From: Jim Busby=20
To: College and University Technicians=20
Sent: Friday, March 25, 2005 10:44 AM
Subject: RE: [CAUT] Pulley keys.
=20
List, (especially Don M.) We just bought 9 new UST7s and all the keys are =
pulley! Not a huge amount, but not acceptable. I wanted to size them but =
the pins are smaller than what I have on hand. (.125 ??)  However, just to =
let you know how big the holes were some of the Yamaha pins would fit =
(.137) My question is, has anyone else noticed this, and am I being too =
nitpicky. (since this is only a vertical for heaven's sakes*) Does this =
amount of "pully-ness" really make that much of a difference in an upright =
used mainly for non majors? Thanks, Jim Busby RPTBYU =20



---------------------- multipart/alternative attachment
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/caut.php/attachments/ab/13/a8/de/attachment.htm

---------------------- multipart/alternative attachment--