Exactly! David I. ----- Original message ---------------------------------------- From: Thomas Seay <t.seay@mail.utexas.edu> To: College and University Technicians <caut@ptg.org> Received: Mon, 2 May 2005 14:54:27 -0500 Subject: Re: [CAUT] S&S D tenor dampers >We've had very good luck replacing worn out/damaged trichord damper >felt by "carefully" cutting the white damper felt from the red >backing felt and gluing on a replacement damper cut from Yamaha >trichord felt. The size is almost perfect and there always seems to >be a big improvement. The problem, of course, is getting the Yamaha >trichord felt. >Best wishes, >Tom >>On Monday, May 2, 2005, at 03:21 PM, David Ilvedson wrote: >> >>>Couldn't you just replace that damper felt? Seems to me your >>>spinning your wheels... >>> >>>David I. >>> >> >>If you happen to have an extra $80 lying around for a set of >>Steinway damper felts for odd replacements... >> >>Jeff >>_______________________________________________ >>caut list info: https://www.moypiano.com/resources/#archives >-- >Tom Seay >Piano Tech Office >School of Music >The University of Texas at Austin >(512) 232-2072 >mailto:t.seay@mail.utexas.edu >_______________________________________________ >caut list info: https://www.moypiano.com/resources/#archives
This PTG archive page provided courtesy of Moy Piano Service, LLC