[CAUT] Werkmeister in Jorgensen

[Alan McCoy]

These numbers correspond to those on Jason Kanter's site (which is a great
site) http://rollingball.com/TemperamentsFrames.htm). If you are concerned
about tension changes, subtract 4.89 from these offsets to keep overall
tension change to zero.

Alan


-- Alan McCoy, RPT
Eastern Washington University
amccoy at mail.ewu.edu
509-359-4627


> From: Ken Zahringer <ZahringerK at missouri.edu>
> Reply-To: "College and University Technicians <caut at ptg.org>" <caut at ptg.org>
> Date: Tue, 15 Aug 2006 14:28:17 -0500
> To: "College and University Technicians <caut at ptg.org>" <caut at ptg.org>
> Conversation: [CAUT] Werkmeister in Jorgensen
> Subject: Re: [CAUT] Werkmeister in Jorgensen
> 
> I don¹t have Tuning, but the Werckmeister III is in my Verituner, and Dave
> Carpenter said he got all his data from Jorgensen.  The offsets I have are:
> 
> A   0.00
> A#  +7.82
> B   +3.91
> C   +11.73
> C#  +1.96
> D   +3.91
> D#  +5.87
> E   +1.96
> F   +9.78
> F#  0.00
> G   +7.82
> G#  +3.91
> 
> Hope this helps,
> Ken Z.
> 
> 
> On 8/15/06 1:12 PM, "Becker, Lawrence (beckerlr)" <BECKERLR at UCMAIL.UC.EDU>
> wrote:
> 
>> Does anyone know if Jorgensen gives instructions and/or offsets for tuning
>> Werkmeister III in Tuning?  I can¹t find it from the indices.
>>  
>> Thanks in advance
>>  
>> Lawrence Becker, RPT
>> Piano Technician
>> College-Conservatory of Music
>> University of Cincinnati
>>  
>> 
> 
> 
> -- 
> Ken Zahringer, RPT
> Piano Technician
> MU School of Music
> 297 Fine Arts
> 882-1202
> cell 489-7529
>