You can get that cord from Schaff. I believe you use the damper flange cord just below the butt springs on pg 105. Look at the damper flange #3730, the spring is held by that cord. A little water will probably take it out. KR ----- Original Message ----- From: daniel carlton To: pianotech at ptg.org ; caut at ptg.org Sent: Wednesday, August 30, 2006 12:20 PM Subject: [CAUT] butt spring replacement with photo hi can someone tell me the best way to replace hammer butt springs in a kimball? it looks like some type of cloth that holds the spring in place. how do i get it out? what do i use to replace the cloth? (i have the springs from Schaff already) ------------------------------------------------------------------------------ daniel carlton hacicspe at gmail.com ------------------------------------------------------------------------------ hi can someone tell me the best way to replace hammer butt springs in a kimball? it looks like some type of cloth that holds the spring in place. how do i get it out? what do i use to replace the cloth? (i have the springs from Schaff already)  daniel carlton hacicspe at gmail.com -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/caut.php/attachments/20060830/60591510/attachment.html
This PTG archive page provided courtesy of Moy Piano Service, LLC