[CAUT] front rail delemna

[Chris Solliday]

[CAUT] front rail delemnaJon's suggestion 2 is good, you can combine an economic affair and subcontract to someone who can measure, cut and glue wood. Chris Solliday
  ----- Original Message ----- 
  From: Jon Page 
  To: caut at ptg.org 
  Sent: Wednesday, March 08, 2006 1:13 PM
  Subject: [CAUT] front rail delemna


  Either replace the indexing pins on the bottom of the keyslip
  with screws or take it to a woodworking shop and have them
  inlay a new piece of wood and route a new dovetail slot.
-- 

  Regards,

  Jon Page


------------------------------------------------------------------------------


  _______________________________________________
  caut list info: https://www.moypiano.com/resources/#archives
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/caut.php/attachments/20060308/9cbff5ef/attachment.html