On "ask the experts", I got the following question from a piano player. The guy's in Itally. I told him hammer blow is 45mm, and key dip is 10mm. But he claims that the Erards are differnt, and that hammer blow needs to be much more. Anyone with any experience with Erard pianos? Wim Willem Blees, RPT Piano Tuner/Technician School of Music University of Alabama Tuscaloosa, AL USA I have an 1890 erard piano which has a stock action and newly refelted > hammers (correctly refelted). > > My problem is that I cannot find an expert who will give me the correct > factory hammer blow distance and factory key depth, as well as damper > regulation. > > I have asked around and had one piano done but the results were not > correct in my opinion.. the hammers were way too low (over 6cm) at rest > position. > > I also need to know at what point dampers are supposed to engage, and key > depth.
This PTG archive page provided courtesy of Moy Piano Service, LLC