> At 03:32 PM 11/7/2006, Barbara wrote: > Eventually I again hauled out the steam set up. Maybe they came out because they had had a "pre-soak." > > I think that the pre-soak works very well. I've come to the same result from a different direction. I pre-soak, sometimes twice, take out what will come out, and if they are really stubborn THEN I reach for a damp cloth and an iron to steam them out. I don't like cooking wood unless I have to. If there are pulley keys, I'll steam, knowing that it'll shrink the oversized holes - but if the balance rail holes are snug, I'll try to avoid steaming, so I don't have to resize them all later. > > Susan What I want to know is will Barbara set up will work on upright flat dampers. They must cut those out of one block all glued together to use that tough of a glue job. Keith -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/caut.php/attachments/20061108/33c43215/attachment.html
This PTG archive page provided courtesy of Moy Piano Service, LLC