Thanks to all who contributed to the loose-capstans thread. Last week I took the piano out, stack off and checked all of them. Any capstan that I could turn with my bare fingers I removed and glue-sized the hole. When dry I replaced the capstans and they were quite nice. Problem solved. I didn't (and normally don't) have any CA glue so I used the diluted Titebond. Thanks for all the ideas! dave __________________________ David M. Porritt, RPT Meadows School of the Arts Southern Methodist University Dallas, TX 75275 dporritt at smu.edu <mailto:dporritt at smu.edu> -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/caut.php/attachments/20060921/30c02100/attachment.html
This PTG archive page provided courtesy of Moy Piano Service, LLC