Ric, Thanks! Your approach is the direction I hope piano rebuilders will take if they undertake invasive procedures with these instruments. Bill In a message dated 1/18/2007 12:37:32 PM Pacific Standard Time, ricb at pianostemmer.no writes: Bill Wonderful post. I agree so much with everything you write. I would like to point out that the desire to take into consideration historical concerns in regards to my own rebuild has led me to re-assemble the old panel and bridges and build a display box for them accompanied by all the original scale specs. Since I have decided to change physical dimensions to some small degree, it seemed correct to at least do this much so that if at any point in time someone wanted the original specs... or wanted to undo what I have done (will do) they can. Cheers RicB -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/caut.php/attachments/20070118/d719ef3c/attachment.html
This PTG archive page provided courtesy of Moy Piano Service, LLC