Oops, you're right. I just know that Juan said the upper octave was a problem and it seemed in his rescale there was his size 13. I dunno, but I'll ask him about it since there seems to be interest in a D. Thank, Jim -----Original Message----- From: caut-bounces at ptg.org [mailto:caut-bounces at ptg.org] On Behalf Of Porritt, David Sent: Wednesday, May 02, 2007 12:17 PM To: College and University Technicians Subject: Re: [CAUT] Pure Sound Jim: There isn't any 13 wire on a D. Juan lists a strong 13.5. dp David M. Porritt dporritt at smu.edu -----Original Message----- From: caut-bounces at ptg.org [mailto:caut-bounces at ptg.org] On Behalf Of Jim Busby Sent: Wednesday, May 02, 2007 12:42 PM To: College and University Technicians Subject: Re: [CAUT] Pure Sound Dennis, It hasn't been done, yet. This summer I plan on doing one. The scale is available but the new "stronger" size 13 wire is not available so you have to use Roslau or Mapes up there. I haven't strung a high profile instrument with the wire yet but after 3 years it certainly seems to be great wire and we're getting more bold with which pianos we're using it on. Jim -----Original Message----- From: caut-bounces at ptg.org [mailto:caut-bounces at ptg.org] On Behalf Of johnsond Sent: Wednesday, May 02, 2007 11:13 AM To: College and University Technicians Subject: Re: [CAUT] Pure Sound Would you use it on a Concert D? - Or has that been done? From what I read it sounds like they recommend it more for smaller instruments. thanks, dennis.
This PTG archive page provided courtesy of Moy Piano Service, LLC