[CAUT] Weber grand block

[Ron Nossaman]

> Thanks to all for some excellent suggestions, esp. the mock up. I 
> thought about the two different block materials. I usually replace with 
> delignit or falconwood. But wouldn't drilling be a problem as one drills 
> the different materials differently; much smaller margin for delignit? 
> Nancy

You caut types are missing out on an awful lot of tech stuff 
by not reading pianotech. I typically use a 9mm Delignit 
capped multilam block that I assemble myself, and double drill 
1/4" first, followed by 6.8mm. Full depth, both passes.
Ron N