Our Baldwin D here in Pacifica, CA has those same parts. It sounds real nice. David Ilvedson, RPT Pacifica, CA 94044 Original message From: "Paul T Williams" To: caut at ptg.org Received: 4/8/2008 8:01:13 AM Subject: [CAUT] Ronsen-Wurzen hammers Hi gang, This summer I'm rebuilding the action on our 1956 Baldwin D using Renner shanks/flanges and wippens. I'm also, per your previous reccommendations, trying Ronsen-Wurzen hammers for the first time. I have some time before summer arrives to "prep" the parts, weigh off the shanks, check pinning, etc. My question is; What sort of pre-voicing should be done with these hammers? Do they require pre-filing, juicing, needling etc.? They're already bored, tapered and tails shaped nicely. Thanks for any input! Paul T. Williams RPT Univ. of Nebraska -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/caut.php/attachments/20080408/7d145f4d/attachment.html
This PTG archive page provided courtesy of Moy Piano Service, LLC