Hi all again, Don wigent hear. I have forgot to mention in my last mail that I have ben grinding out wood from the in side of the tales of the hammers in order to liten them. -----Original Message-----Don Wigent From: caut-bounces at ptg.org [mailto:caut-bounces at ptg.org] On Behalf Of David Love Sent: Wednesday, April 16, 2008 11:50 PM To: 'College and University Technicians' Subject: Re: [CAUT] Abel select Vs. Rosner-Wurzen I think it depends on which "other hammers" and which pianos. The Abel Select definitely has its place and can be just the right hammer given a good match with the board and scale. One thing to keep in mind is that it is quite heavy which may be fine on certain pianos but will create problems on others both in terms of both touch and tone. Not being a one hammer for all applications person I think the Abel Select is an excellent hammer that in the right situation performs extremely well. In my experience that tends to be more performance pianos where power is needed, higher tension scales and low leverage. David Love davidlovepianos at comcast.net www.davidlovepianos.com -----Original Message----- From: caut-bounces at ptg.org [mailto:caut-bounces at ptg.org] On Behalf Of wbis290 at aol.com Sent: Wednesday, April 16, 2008 3:49 PM To: caut at ptg.org Subject: [CAUT] Abel aelect Vs. Rosner-Wurtzen Hi All, I was wandering if any of you have tried the Abel "Select" from Pianotek vs. other hammers. I have put them in a Mason & Hamlin CC, two 9'2" Bechstein ENs, and several Steinways. I have found them to give a great sound with little voicing. I have been told that from one of the professors that played a new Steinway B at another university that while the new B had a great sound, it could not match the sound of the Steinway B that I put the Abel "Select" hammers on. I was also told by all of the staff that neither of the Bechsteins sounded nearly as good as they do now. I was just told by a guest artist that she loved the Mason & Hamlin because of the beautiful coloring of the tone of the piano. Just curious to see if anyone else out there has tried these hammers and how they liked them. God bless Bill Balmer, RPT University of Findlay and Ohio Northern University
This PTG archive page provided courtesy of Moy Piano Service, LLC