Me too! :>) Paul Tim Geinert <geinert at drtel.net> Sent by: caut-bounces at ptg.org 08/19/2008 12:28 PM Please respond to College and University Technicians <caut at ptg.org> To College and University Technicians <caut at ptg.org> cc Subject Re: [CAUT] S&S hammer flange rail material This thread has been highly beneficial to me. Thank you to all. Tim G On Aug 19, 2008, at 12:09 PM, Alan McCoy wrote: > Wow, I like it! I heated up the beeswax in my hot pot. Applied a > tiny amount > with a brush onto the braid that was already stuck on the rail. > Then heated > it slightly with a heat gun. The wax melted into the cloth and not > only > firmed it up but made it slightly sticky. Just like waxing skis > will give > you purchase in the snow for climbing. > > Alan > >> >> firms the stringing braid so it doesn't slide so much, only put it >> on the >> top side > >> > > -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/caut.php/attachments/20080819/833fdaa5/attachment.html
This PTG archive page provided courtesy of Moy Piano Service, LLC