[CAUT] 1098 Fall Board removal

[Ron Poire]

If someone hasn't answered, here's a little help.
The fallboard is attached to the bass and treble keyblocks.
The fastening screws are underneath, right next to the legs, one close to 
the front, and the other, very close to the knee panel.  This must be lifted 
out as a unit, and is front-heavy whenn freed from the retaining screws.
It will be easier if you remove the key upstop rail before removing the 
fallboard.
If you have any more questions, send them along and someone will be glad to 
help.

Ron Poire
----- Original Message ----- 
From: "terryb" <t46xd8jb at xplornet.com>
To: "Caut" <caut at ptg.org>
Sent: Friday, December 05, 2008 2:18 PM
Subject: [CAUT] 1098 Fall Board removal


> Hi,
>
> I only get to see one S&S upright. The owner says it's a 1098 but the 
> plate has the number "45" cast into it. I have been unable to remove the 
> fall board. Can someone clue me in to the secret of how to remove it?
>
> Thanks in Advance
>
> Terry Beckingham RPT
> Part Time Brandon U
>
>