List, Thought some of you might like to see these pics. I just finished plugging over 400 holes(I know that key replacement should have been considered, but it is not possible for this customer), and that was after I left what I hope to be a basic starting weight pattern in the keys. I just weighed the leads that came out. To be honest, I was a little dissappointed they only weighed 15 pounds. Oh well. I would be interested, though, to find out where that stands as far as bragging rights go. Oh. The key weighing was part of an S&S "B" rebuilding 10 years ago that included Renner Blues on shanks with a 16mm pin to knuckle measurement, pinblock replacement without glueing it in or fitting it to the flange and also pushed the plate back to shorten #88 to about 46 mm, delignit block with VERY tight pins and coils 10 to 12 mm above plate. This piano is just a joy! :-( Back to the grindstone. Tim Geinert -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/caut.php/attachments/20080107/f7027dc0/attachment-0001.html -------------- next part -------------- A non-text attachment was scrubbed... Name: pianoweights1.jpg Type: image/jpeg Size: 51846 bytes Desc: not available Url : https://www.moypiano.com/ptg/caut.php/attachments/20080107/f7027dc0/attachment-0002.jpg -------------- next part -------------- A non-text attachment was scrubbed... Name: pianoweights2.jpg Type: image/jpeg Size: 53887 bytes Desc: not available Url : https://www.moypiano.com/ptg/caut.php/attachments/20080107/f7027dc0/attachment-0003.jpg
This PTG archive page provided courtesy of Moy Piano Service, LLC