Heat is best Patrick. We're actually liking André's glue for hanging hammers... nice consistency, reasonable working time, gap-filling/no shrinkage and a rock-hard glue joint. Anyhow, I won't laugh about your mistake, if you don't ask how we found out that heat softens the glue! Best regards, Mark Cramer, Brandon University -----Original Message----- From: caut-bounces at ptg.org [mailto:caut-bounces at ptg.org] On Behalf Of James Patrick Draine Sent: November 6, 2008 7:22 PM To: caut at ptg.org Subject: [CAUT] breaking Bolduc glue joint? While putting a pedal lyre together yesterday, sleep deprived from watching election results, I (1) decided to use some Bolduc glue to reattach the lyre posts to the pedal box (first time using the stuff, no tech sheet came with the glue), and (2) allowed several interruptions to distract me to the extent that I glued the box in backwards! What's the best way to go in loosening this new glue joint? Heat? Feeling rather stupid, Patrick Draine
This PTG archive page provided courtesy of Moy Piano Service, LLC