[CAUT] after ring on bass damper

[David Ilvedson]

I think Susan right and this is the problem, although in my experience the damper is obviously sluggish and hanging.   Do them all and get it done with...otherwise it will continue to be a problem...

David Ilvedson, RPT
Pacifica, CA  94044

----- Original message ----------------------------------------
From: "Susan Kline" <skline at peak.org>
To: caut at ptg.org
Received: 8/2/2009 10:09:23 PM
Subject: Re: [CAUT] after ring on bass damper


>At 09:05 PM 8/2/2009, you wrote:
>>K&C's are made by Samick. Thanks to those who suggested the pinning 
>>problems. Next time I tune the piano, I'll repin the two offending notes.
>>
>>Wim

>I think you'll find it's a miracle cure. Let us know, please, if 
>repinning the two underlevers fixes it? Probably the underlever 
>flange center is the offender, instead of the top flange center, IMO. 
>While you have the darned things out, I'd still do both centers, even 
>if only one of the two is tight.

>Susan Kline