Splendid idea! Thanks Tom! John ---- Original message ---- >Date: Wed, 12 Aug 2009 03:22:22 +0000 >From: mcneiltom at aol.com >Subject: Re: [CAUT] Baldwin sostenuto rail bracket needed >To: jminor at illinois.edu, caut at ptg.org > >Hi, John - > >I recall fashioning a facsimile of one (although I'm not sure it was a Baldwin) from a scrap of pinblock material. Served well. Could be worth a try if you can't find the replacement part. > > ~ Tom McNeil ~ >Vermont Piano Restorations >------Original Message------ >From: John Minor >Sender: caut-bounces at ptg.org >To: caut >ReplyTo: jminor at illinois.edu >ReplyTo: caut at ptg.org >Subject: [CAUT] Baldwin sostenuto rail bracket needed >Sent: Aug 11, 2009 10:37 PM > >I need 1 sostenuto rail bracket for a 1950 Baldwin model F. It's a hefty brass piece. Anyone have any ideas on where I can find one? > >Thanks! > >John Minor >University of Illinois > > >Sent from my Verizon Wireless BlackBerry
This PTG archive page provided courtesy of Moy Piano Service, LLC