I made two more supports for a S&S A but only put on the treble side. The bass side has the glide rail mounted in a tapered support rail. So I'll have to make a tapered shim (5mm-16mm) to mount behind that support. The supports are about 11" long because that is the max cut I can get on my bandsaw. -- Regards, Jon Page -------------- next part -------------- A non-text attachment was scrubbed... Name: desk4.jpg Type: application/octet-stream Size: 183223 bytes Desc: not available URL: <http://ptg.org/pipermail/caut_ptg.org/attachments/20090104/d1dd2052/attachment-0003.obj> -------------- next part -------------- A non-text attachment was scrubbed... Name: desk6.jpg Type: application/octet-stream Size: 69530 bytes Desc: not available URL: <http://ptg.org/pipermail/caut_ptg.org/attachments/20090104/d1dd2052/attachment-0004.obj> -------------- next part -------------- A non-text attachment was scrubbed... Name: desk7.jpg Type: application/octet-stream Size: 43390 bytes Desc: not available URL: <http://ptg.org/pipermail/caut_ptg.org/attachments/20090104/d1dd2052/attachment-0005.obj>
This PTG archive page provided courtesy of Moy Piano Service, LLC