[CAUT] Free Sample Kit: Buttons, Mortise Inserts, Glue

[Steven Sandstrom]

  Hi Mike,

I would like to get your sample kit. I take care of a couple of small colleges that may need this soon. If you have any extra kits I would like to show it at our next chapter meeting. If you don't please send some business cards that I can pass out. Thanks for doing great work.

Steve Sandstrom
1810 8th Ave. S.E.
Cedar Rapids, Iowa 52403
  ----- Original Message ----- 
  From: Mike Morvan<mailto:keymaestro at verizon.net> 
  To: caut ptg chatline<mailto:caut at ptg.org> 
  Sent: Tuesday, January 06, 2009 8:25 AM
  Subject: [CAUT] Free Sample Kit: Buttons, Mortise Inserts, Glue


  List,
      We have put together a sample kit of our buttons, mortise inserts and glue. (see pictures below) If interested send me an email with your address and we will get one out to you.
  Our buttons and mortise inserts are CNC Machined with incredible accuracy and repeatability. They are available  bushed or unbushed. These are not the "one size fits all buttons", and they are bushed by hand with hot hide glue.
  The buttons come in three different sizes designed to fit the following pins:
  0.125, 0.129, 0.133
  0.137, 0.145, 0.152
  0.160

  We also make custom buttons in which the mortises are at angles (used on a lot of domestic grands) and we make buttons for the 0.087 pin found on older domestic makes. See picture below.

  The mortise inserts come in two different sizes designed to fit the following pins:
  0.125, 0.129
  0.145
  View our website for a slideshow on mortise insert application.

  The glues are our own plastic glue (for gluing acrylic, styrene and mineral plastic) which is similar to PVC-E but is more viscous, stronger and DRIES WHITE and our glue for new ivory and bone. Both glues can be used to glue down restoration ivory as long as the original protein glue is removed from the keytop and the keystick.

  We also just made and delivered a set of RC&S soundboard cauls for a bellyman in New England and they could not believe we were able to give them the exact curvatures they wanted in all dimensions.

  Thanks, Mike

  Blackstone Valley piano
  Michael A. Morvan
  76 Sutton Street
  Uxbridge, Ma 01569
  (508) 278-9762
  www.pianoandorgankeys.com<about:blank>
  www.thepianorebuilders.com<http://www.thepianorebuilders.com/>

  ANGLED BUTTONS

  MORTISE INSERTS AND SRAIGHT BUTTONS

  MORTISE INSERTS INSTALLED
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://ptg.org/pipermail/caut_ptg.org/attachments/20090112/19f4f70b/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 23381 bytes
Desc: not available
URL: <http://ptg.org/pipermail/caut_ptg.org/attachments/20090112/19f4f70b/attachment-0003.jpe>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 33112 bytes
Desc: not available
URL: <http://ptg.org/pipermail/caut_ptg.org/attachments/20090112/19f4f70b/attachment-0004.jpe>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 31209 bytes
Desc: not available
URL: <http://ptg.org/pipermail/caut_ptg.org/attachments/20090112/19f4f70b/attachment-0005.jpe>