Oops, wrong person, too. <blush> br ----- Original Message ----- From: "Barbara Richmond" <piano57 at comcast.net> To: "David Ilvedson" <ilvey at sbcglobal.net>, caut at ptg.org Sent: Thursday, January 15, 2009 4:56:19 PM GMT -06:00 US/Canada Central Subject: Re: [CAUT] string leveling thingy Dang, forgot to change the address... br ----- Original Message ----- From: "Barbara Richmond" <piano57 at comcast.net> To: "David Ilvedson" <ilvey at sbcglobal.net>, caut at ptg.org Sent: Thursday, January 15, 2009 4:55:36 PM GMT -06:00 US/Canada Central Subject: Re: [CAUT] string leveling thingy Daniel, I remember the pictures of the prototype--I mean, this is the prototype I saw, right? Have you had some made up and are they ready to sell? I can put it in Tips, Tools and Techniques when you are ready. Barbara Richmond, RPT associate editor Piano Technicians Journal ----- Original Message ----- From: "David Ilvedson" <ilvey at sbcglobal.net> To: pianotech at ptg.org, caut at ptg.org Sent: Thursday, January 15, 2009 4:25:45 PM GMT -06:00 US/Canada Central Subject: [CAUT] string leveling thingy I was following Daniel Carlton's advice on the archives: I put in site: ptg.org aftertouch On the page was a link to the following: "String leveling device and method of use thereof Document Type and Number: United States Patent 7122728 Abstract: A unison gauge for indicating levelness of a string set of a grand piano is described. The gauge has a contact block adjustably engageable with the lowermost tangential aspect of the string set. Battery powered indicators provide an indication for each string. With the piano action withdrawn from the piano case, the base of the device rests on the key bed below the piano hammer strike area of the string set and holds the contact block mounted thereon on an extendable mast. The contacts of the contact block are in a plane parallel to the key bed. The contact block is under slight spring tension when engaged with a string set being monitored and, upon compression of the spring readily slides along the key bed to the next string set. A method of use of the unison gauge is also provided. Ads by Google KOBOLD Messring GmbH Manufacturer for conductivity, flow level, temperature measuring instr. www.kobold.com " I searched the US Patent Office for Patent 7122728 Lots of stuff...check it out David Ilvedson, RPT Pacifica, CA 94044 -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/caut_ptg.org/attachments/20090115/c6798952/attachment.html>
This PTG archive page provided courtesy of Moy Piano Service, LLC