Jim Busby wrote: > Where does one go for half round brass, or is it bronze? (for bearing > points) Since I'd likely not like the available heights, and either have to stock a ton of choices or modify it to suit, I just make my own in the first place from round stock. Ron N -------------- next part -------------- A non-text attachment was scrubbed... Name: splitting brass rod.jpg Type: image/jpeg Size: 50029 bytes Desc: not available URL: <http://ptg.org/pipermail/caut.php/attachments/20090728/f7ac73de/attachment-0002.jpg> -------------- next part -------------- A non-text attachment was scrubbed... Name: sizing half round.jpg Type: image/jpeg Size: 88403 bytes Desc: not available URL: <http://ptg.org/pipermail/caut.php/attachments/20090728/f7ac73de/attachment-0003.jpg>
This PTG archive page provided courtesy of Moy Piano Service, LLC