Here are a couple photos to make clear what I was trying to describe about creating clamps from a pipe. THere is also a cheap spring clamp that I altered for the purpose, bending the ends of its jaws to fit around a knuckle. P3120001.JPG P3120002.JPG Regards, Fred Sturm University of New Mexico fssturm at unm.edu -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/caut_ptg.org/attachments/20090312/2076b4fa/attachment-0001.html> -------------- next part -------------- A non-text attachment was scrubbed... Name: P3120001.jpg Type: image/jpeg Size: 19718 bytes Desc: not available URL: <http://ptg.org/pipermail/caut_ptg.org/attachments/20090312/2076b4fa/attachment-0002.jpg> -------------- next part -------------- A non-text attachment was scrubbed... Name: P3120002.jpg Type: image/jpeg Size: 19266 bytes Desc: not available URL: <http://ptg.org/pipermail/caut_ptg.org/attachments/20090312/2076b4fa/attachment-0003.jpg>
This PTG archive page provided courtesy of Moy Piano Service, LLC