agraffe levelingHi Sloane, Usually not very much movement up is available, so one should not be too agressive in lifting the string and leave something to work with. Joe Goss RPT Mother Goose Tools imatunr at srvinet.com www.mothergoosetools.com ----- Original Message ----- From: Sloane, Benjamin (sloaneba) To: 'David Ilvedson' ; 'caut at ptg.org' Sent: Tuesday, March 31, 2009 6:28 AM Subject: Re: [CAUT] agraffe leveling "I tried pulling up the left string" Do you push down strings also? From: caut-bounces at ptg.org [mailto:caut-bounces at ptg.org] On Behalf Of David Ilvedson Sent: Thursday, March 26, 2009 12:05 PM To: caut at ptg.org; pianotech at ptg.org Subject: [CAUT] agraffe leveling I was attempting to level the strings on a newer Yam C6 the other day. According to Goss's leveling device, all the tenor agraffes were way off. I tried pulling up the left string to level but couldn't make enough of a difference. A bad batch of agraffe drilling? I guess in this situation you have to fit the hammer to what you've got? David Ilvedson, RPT Pacifica, CA 94044 -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/caut_ptg.org/attachments/20090331/6a668ba7/attachment.html>
This PTG archive page provided courtesy of Moy Piano Service, LLC