Paul- Does this have the two part rail, front part fixed, inner part hinged? Maybe you could transplant a rail from an old upright? Or make a solid rail and d/c the half blow. Ed S. ----- Original Message ----- From: Paul Kupelian To: PTG Topics Cc: caut at ptg.org Sent: Sunday, November 15, 2009 3:56 PM Subject: [CAUT] Hammer Stop Rail Hi all, One of my school pianos was vandalized and the whole hammer stop rail assembly from a Kimball Viennese C532 upright was taken out. Any help on this would be appreciated. Paul Paul Kupelian, RPT -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/caut.php/attachments/20091115/e05c404a/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC