[CAUT] Servicing guide rail bushings

[Fred Sturm]

On Nov 21, 2009, at 2:47 PM, dew2 at u.washington.edu wrote:

> I find great advantage to wetting them all, after seating, with  
> McLube, then seating them again after drying.


	And a quick way to lubricate an existing system is, with action out  
of cavity, press the pedal down and run a paint brush loaded with  
prolube along the wires above the guiderail. The lubricant will go  
into the felt as well as coat the wires. I think it is a good idea  
always to have lubricant in the guiderail bushing system.
Regards,
Fred Sturm
University of New Mexico
fssturm at unm.edu