Fred Sturm wrote: > Hi David, > Well stated. Your original post seemed a bit timid: > "A very conscious rotary motion with even a slight forward press" > which kind of sounded like you didn't really mean it about the forward > press. I was just trying to say "right on! press that hammer down with > no apologies!" I agree with you 100%. Including about the worst scenario > (though an extra loose block with lots of friction runs a close second). > Fred And an extra tight block with minimal string friction. Incidentally, a block that's much tighter at the top of the pin than the bottom makes half of these nightmares recede into relative manageability. Ron N
This PTG archive page provided courtesy of Moy Piano Service, LLC