[CAUT] Action Rail Flange Cloth

[Paul T Williams]

How fine a grit?  Like 150? or finer?





From:
"Porritt, David" <dporritt at mail.smu.edu>
To:
"caut at ptg.org" <caut at ptg.org>
Date:
09/25/2009 01:24 PM
Subject:
Re: [CAUT] Action Rail Flange Cloth



I didn’t glue down the sandpaper.  The force of the flanges holds it in 
place.  
 
dp
 
David M. Porritt, RPT
dporritt at smu.edu
 
From: caut-bounces at ptg.org [mailto:caut-bounces at ptg.org] On Behalf Of Paul 
T Williams
Sent: Friday, September 25, 2009 1:19 PM
To: caut at ptg.org
Subject: Re: [CAUT] Action Rail Flange Cloth
 
David, 

Was the bare rail made sticky in any way?  Did you glue down the 
sandpaper.  I've never seen sandpaper on a Steinway rail, but have on lots 
of Baldwins. 

Paul 


From: 
"Porritt, David" <dporritt at mail.smu.edu> 
To: 
"caut at ptg.org" <caut at ptg.org> 
Date: 
09/25/2009 01:16 PM 
Subject: 
Re: [CAUT] Action Rail Flange Cloth
 




I’ve used the adhesive-backed nameboard felt, I’ve used sandpaper, emery 
cloth and genuine Steinway sticky felt.  I don’t think it makes a lot of 
difference.  I’ve also seen just bare rail – like the wippen rail – though 
I haven’t done that myself.  I don’t think it’s a critical link in the 
circle of sound. 
  
dp 
  
David M. Porritt, RPT 
dporritt at smu.edu 
  
From: caut-bounces at ptg.org [mailto:caut-bounces at ptg.org] On Behalf Of 
reggaepass at aol.com
Sent: Friday, September 25, 2009 1:06 PM
To: caut at ptg.org
Subject: Re: [CAUT] Action Rail Flange Cloth 
 
Anybody use sandpaper for this application? 
 
Alan Eder


-----Original Message-----
From: PAULREVENKOJONES at aol.com
To: caut at ptg.org
Sent: Fri, Sep 25, 2009 10:51 am
Subject: Re: [CAUT] Action Rail Flange Cloth 
Paul: 
  
We used to use the Steinway provided black adhesive backed tape. Why pay 
the price. The adhesive-backed brown nameboard felt available from any of 
the other major vendors is quite inexpensive and does the same thing. 
  
P 
  
In a message dated 9/25/2009 12:34:13 P.M. Central Daylight Time, 
pwilliams4 at unlnotes.unl.edu writes: 
Hi All, 

What do you all use for action rail flange cloth, or do you just get some 
from Steinway or wherever...? 

This L I'm working on is in bad shape. I took the old hammer flanges off 
today and the cloth underneath literally disolved in my hands into dust. 
Has anyone used stringing braid cloth? 

Thanks 
Paul 


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://ptg.org/pipermail/caut.php/attachments/20090925/9d6718c1/attachment.htm>