LOL! Many thanks, Gerry. Yes, I¹m learning parts budgets are a big deal!
It¹s helping me to develop some new skills for repairs. :)
Is there enough clearance above the lever to use a simple top and bottom
plate from hardware store with nuts and bolts through?
BTW, at your recommendation, I had José Rodriguez and his brother work on
the case for this piano, and they did a wonderful job, worked their tails
off for 14 hours one Sunday. The price was right!!! I¹m putting together a
photo documentary of the resurrection of this instrument, but have attached
a glimpse of the new image. (I couldn¹t seem to get the photos into chrono
order.) Thank You very, very much for your referral. Also, I learned a ton
by watching them and asking questions throughout the process. A great
experience. I appreciate your help!
Hope these pic files aren¹t too big for server bandwidth. Not sure what the
guidelines are for attachments.
--
Paul Milesi, RPT
Staff Piano Technician
Howard University Department of Music
Washington, DC
From: G Cousins <cousins_gerry at msn.com>
Reply-To: <caut at ptg.org>
Date: Wed, 11 Aug 2010 06:52:44 -0400
To: CAUT <caut at ptg.org>
Subject: Re: [CAUT] Sostenuto Trap Lever Repair
Paul,
Very typical for institutional piano pedal pushers. Never heard of half
pedaling.
Glue will hold for a while. Sounds like you've covered all the bases with
clamping and such.
I had to use a metal strengthening plate in the top and bottom of the lever
for maximum strength.
Guess one could have a machine shop make one out of steel or, for really
really hard use, titanium.
Yes, using plate support it's NOT replacement with a new part and the
re-construction could exceed the price of the new part but there is the
bureaucratic budget processes mentality to always ponder.
Perhaps,just let it be until it breaks again and then request a replacement
part. After all it IS just the sostenuto pedal. ;)
My bet: 3 weeks into the semester or (most likely) 7:52 pm before the 8:00
pm MAJOR showcase concert for capital campaign to build the new Gym/Business
building.
Wager: 132,792,500.00 ZWD
Best,
Gerry C
> Date: Wed, 11 Aug 2010 02:11:11 -0400
> From: paul at pmpiano.com
> To: caut at ptg.org
> Subject: [CAUT] Sostenuto Trap Lever Repair
>
> Check out the attached photos of a 1970 Steinway D sostenuto trap lever
> which is cracked the long way and with the direction of stress. Someone
> tried to repair it at some point by wrapping it with packing tape (no glue).
>
> What are the chances of effecting a successful glue repair? I know I've
> been told many times that a glue repair is stronger than the original wood,
> but will it really take the stress of the leverage applied by the sostenuto
> pedal along such a long break?
>
> I just finished loading it up with Titebond and clamping tightly with an
> aluminum rail on one side for support, and a couple small clamps holding
> portions that extend to a point, etc. Figure I'll give it 24 hours clamped,
> see what happens. Any bets? If it doesn't work, I guess the school will
> just have to spring for a new one. If this piano ends up being used for
> recitals, would buying new be more reliable than a repair?
>
> Also, the half-rounded part that interfaces with the other wooden lever
> seems to be covered with something thick and black. Is this just old grease
> of some kind, or is there supposed to be leather there and it's
> disintegrated?
> --
> Paul Milesi, RPT
> Staff Piano Technician
> Howard University Department of Music
> Washington, DC
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://ptg.org/pipermail/caut.php/attachments/20100811/4839fa71/attachment-0001.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Photo_111909_011.jpg
Type: image/jpeg
Size: 53999 bytes
Desc: not available
URL: <http://ptg.org/pipermail/caut.php/attachments/20100811/4839fa71/attachment-0007.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: P1010299.jpg
Type: image/jpeg
Size: 59500 bytes
Desc: not available
URL: <http://ptg.org/pipermail/caut.php/attachments/20100811/4839fa71/attachment-0008.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: P1010312.jpg
Type: image/jpeg
Size: 44984 bytes
Desc: not available
URL: <http://ptg.org/pipermail/caut.php/attachments/20100811/4839fa71/attachment-0009.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: P1010319.jpg
Type: image/jpeg
Size: 58613 bytes
Desc: not available
URL: <http://ptg.org/pipermail/caut.php/attachments/20100811/4839fa71/attachment-0010.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: P1010314.jpg
Type: image/jpeg
Size: 49970 bytes
Desc: not available
URL: <http://ptg.org/pipermail/caut.php/attachments/20100811/4839fa71/attachment-0011.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Photo_111909_010.jpg
Type: image/jpeg
Size: 51036 bytes
Desc: not available
URL: <http://ptg.org/pipermail/caut.php/attachments/20100811/4839fa71/attachment-0012.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Photo_111909_012.jpg
Type: image/jpeg
Size: 60452 bytes
Desc: not available
URL: <http://ptg.org/pipermail/caut.php/attachments/20100811/4839fa71/attachment-0013.jpg>
This PTG archive page provided courtesy of Moy Piano Service, LLC