All, What is the groove for in this wire bending tool? It isn't big enough for bridle wire, damper, etc. and it appears factory. There are no identifying marks to tell me where the tool comes from. Thanks. Jim Busby BYU -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/caut.php/attachments/20110105/c9261ecc/attachment-0001.htm> -------------- next part -------------- A non-text attachment was scrubbed... Name: P1020041.JPG Type: image/jpeg Size: 264187 bytes Desc: P1020041.JPG URL: <http://ptg.org/pipermail/caut.php/attachments/20110105/c9261ecc/attachment-0002.jpeg> -------------- next part -------------- A non-text attachment was scrubbed... Name: P1020042.JPG Type: image/jpeg Size: 331526 bytes Desc: P1020042.JPG URL: <http://ptg.org/pipermail/caut.php/attachments/20110105/c9261ecc/attachment-0003.jpeg>
This PTG archive page provided courtesy of Moy Piano Service, LLC