With a string of broken bass strings I would be interested in knowing about tension, breaking % and the contour of the inside of the agraffe. By measuring the speaking lengths, cores, and wrap diameters the scale can be evaluated for excessive tension relative to breaking %. A lower tension scale can be designed which will likely help the situation. The agraffe should have a round cross section simular to the capo bar (previously discussed here. One final thought. Test an old broken string for degree of maliability by making repeated 90 degree bends in the wire. Any number less than three or four would indicate the wire is too brittle. ------------- Only one more week of tuning hell before juries! Newton nhunt@gandalf.rutgers.edu Details make for perfection but perfection is no detail. Quoted from an unknow source
This PTG archive page provided courtesy of Moy Piano Service, LLC