On Wed, 21 Aug 1996, Newton Hunt wrote: > Hi, Avery, > I remember Bill Spurlock mentioning he uses a router with a holder of > some kind to do that job. I have not done it myself but I can think of one way > but using a board cut to hold the shank with a cutout to allow the cutter to > get to the shank. Please be careful because routers are indifferent to what > they cut, wood or meat. > Newton Yes, Bill designed a carriage to be used with a router table. I've made one from his plans, and it works great. I'll try to find a drawing and run it in the Journal. In the meantime, you might try to get a copy of the drawing from Bill. Steve
This PTG archive page provided courtesy of Moy Piano Service, LLC