> Date: Fri, 23 Aug 1996 10:29:35 -0400 (EDT) > From: Joseph Vitti <JVITTI@ccmail.sunysb.edu> > Subject: Flange Bushing applicator > To: Pianotech@byu.edu > Reply-to: pianotech@byu.edu > > State University of New York at Stony Brook > Stony Brook, NY > > Joseph Vitti > Piano Technician > Music > 516 632-7330 > 23-Aug-1996 10:18am EDT > FROM: JVITTI > TO: Remote Addressee ( _Pianotech@byu.edu ) > > Subject: Flange Bushing applicator > > > I've been using a Low Density Polyethylene pipette. It is about 7" long with a > bulb on top to hold the CLP and a narrow shaft with an even smaller tip. It > will dispense a nice little drop right where you want it. I have several > thousand which we (Protek) were going to distribute to the supply houses. They > are disposable so when they wear out just chuck it a get a new one. If there is > interest we can get them out ASAP. > > JVITTI@CCMAIL.SUNYSB.EDU > > > Joe, It sounds like it might be ideal... > > David ilvedson, RPT Pacifica, CA
This PTG archive page provided courtesy of Moy Piano Service, LLC