In a message dated 96-12-03 00:20:22 EST, you write: >List - > >I have a customer whose Gordon Laughead spinet was made with a couple of >panels in the music rack made up of heavy wire interwoven, maybe 3/4" >spacing. > >Every visit over the years, I have had some success quieting the rattle as it >wants to sing along with the music, but it gets worse from year to year. > I've bent wires, added glue, but any help was short-lived. Is there any >solution short of ripping out the wire and fashioning wood inserts? > >Bill Maxim, RPT Why not just replace the whole music rack. GRK sells them. They will even finish it, if you want. GRK's number is 800-289-2362 Willem Blees RPT St. Louis
This PTG archive page provided courtesy of Moy Piano Service, LLC