not sure I understand...you take the coil off the cut pin and move it to the backed-out pin in the piano? ---------- > From: Jon Page <jpage@capecod.net> > To: pianotech@byu.edu > Subject: Re: Opinions On Insta-coiler > Date: Wednesday, December 04, 1996 6:21 PM > > For individual string replacement, I have a pin which I cut 1/4 inch > below the wire hole and use it in my stringing crank. > This allows 3 coils and access to tight spots. > Jon Page > Cape Cod. Mass > jpage@capecod.net
This PTG archive page provided courtesy of Moy Piano Service, LLC