Dick, Go and use Bill Spurlocks method. Unfortunately Bill is out of the office until Jan 9 but if you've never done a set, I would wait and get his two step method. Ron Shiflet On Mon, 30 Dec 1996 09:26:55 -0500 Pianotoone@aol.com writes: >Never have bushed keys. I know how it is to be done but would >appreciatte >any hints. I.E. Do you just loop the bushing cloth into the hole and >cut it >after the glue dries or cut strips. I have practiced on old keys and >find if >I cut short strips, i don't get them in the holes very well and if I >loop >them into the hole they are difficult to cut and the cut ends are not >glued. > Any tricks from the "bushing pros" out there would sure be welcome. >Thanks > >Dick Day >Marshall, MI >
This PTG archive page provided courtesy of Moy Piano Service, LLC