>> The problem is in the stack configuration. It does >>not have to do with the capstan placement. >>Stanwood >Usually, when I find the let-off rail in the wrong place for new parts, the >length of the jack, the angle of the tender, or the diameter of the knuckle >is different from the original. >Ed Foote Yes, the problem is somewhere between the strike surface of the hammer and the letoff button, so the factors would include bore, knuckle thickness, length, tender angle, distance from the knuckle to the hammer center, and spread distance. Anything else? David Stanwood
This PTG archive page provided courtesy of Moy Piano Service, LLC