>1.The lever arm from the player does not extend into the keyframe cavity but stops flush with the top of the keybed. 2. no parts left over from the player that would make the shift lever function. 3. does not appear to have ever been any connection from the shift lever to the keyframe,(no rub marks). The shift arm was in contact with a removable block that attached with machine screws. You should see the sockets for them in the bottom of the rail above the vertical part of the shifter arm. You will need to make a new block that will screw to the bottom of the action frame, and the lever will press against that. You must remove the block when you pull the action. regards., Ed Foote
This PTG archive page provided courtesy of Moy Piano Service, LLC